Time change must be performed at the Attendant Console. (If customer does not have an Attendant Console at their site, we need to schedule a technician to change the time using one of our consoles.)

To Set the Time on the Console:
1. Press FUNCTION
2. Press ATT FUNCTION
3. Press SET TIME

The time (which can be in either the 12 or 24 hour format, depending on system programming), is entered as HH:MM, where the HH is hours and the MM is minutes. This example uses a 12 hour format:

When two digits have been entered for the hours, the “:” will automatically be displayed.

Options:
Press PM to register the time as after 12:00 PM, in 12 hour format
Press SET to enter the time as shown
Press EXIT

BACK