Occasionally, the system date and time need to be reset )for example, leap year or change to daylight-saving time).  Any attendant can use the keyset to change the date and time that appear on all display keysets and in the SMDR and SMDA printouts.

NOTE:  If you make a mistake, lift and replace the handset; then start over.

(1) While on hook, press SPCL and dial 021.  [Displays SET TIME OF DAY.]

(2) Using the keypad, enter the time in hours and minutes.  Then press * for AM or # for PM.  For example, 900* = 9:00AM and 230# = 2:30PM.[Displays SET DATE MM-DD-YYYY.]

(3) Enter the month, day, and year.  (For example, 01011986 = 01-01-1986.)  If you make a mistake, backspace by pressing MUTE.  [Displays SET DAY OF WEEK SUN.]

(4) Scroll through the day-of-week selection by pressing # to go forward or * to go backward.  When the desired day is displayed, press SPKR to terminate programming.  You hear a progress tone.